Guide-intercom

Installation Guide
2 - Intercom Connection to homeit BOX
STEP 1

Connect the homeit BOX

Use the white cable enclosed to connect one end to the two slots identified with the “INTERCOM” label.
If the homeit BOX is facing UP
If the homeit BOX is facing DOWN
STEP 2
Open your Intercom
intercom-step2a.png
TIP 1: most intercoms have a screw or push button on the bottom.

TIP 2: Slide a screwdriver around the intercom to detach the plastic enclosure from the base.

STEP 3
Connect the intercom

A – Pass the white cable through your intercom. If needed unscrew the intercom to pass the cables between intercom and wall.

B – Now you need to connect the provided cable to your intercom. To know where to connect the wires into your intercom consult a list of intercom models in here.

Tip: usually you will need to unscrew 2 screws in your intercom, insert cables below the screw and screw them again trapping the metal part of the wire.

PASSO 4
Power up the homeit BOX
Plug the homeit BOX using the enclosed Power Supply. Please, don’t close the homeit BOX yet.
Support Contact: support@homeit.io
Business Hours: 9am – 6pm (WET) every day, including weekends.